At present, the traditional epoxy floor coating construction materials in hangzhou market can be divided into solvent type and non-solvent type, both of which contain certain volatile organic compounds (VOC), which will be released into the air in the production, construction and other stages to pollute the environment and harm health. Waterborne epoxy floor paint has been gradually recognized by the market in recent years. At present, the pressure of environmental protection is affecting the epoxy floor paint all over the world.
Seka floor engineering adhere to independent research and development, innovation and development, the production of water-based epoxy coating with water as the solvent, good adhesion to the wet substrate, environmental protection, easy to operate, wide range of application. Seka waterborne epoxy floor paint solves the problem that waterborne products are not wear-resistant and dirty.
1, with water as the dispersing medium, environmental protection and health, can be used in the relatively closed and construction needs to be carried out at the same time.
2, non-toxic, is a food grade coating, only contains silicon, oxygen, aluminum and other inorganic components and does not contain heavy metals.
3, with high temperature resistance, smokeless, non-combustible characteristics. Has the very strong fire protection function to the building.
4、对地基含水率要求低。 Low requirement on foundation moisture content.
5、表面张力低、表面污垢易清理、单向可透水汽。 Low surface tension, easy cleaning of surface dirt, one-way water vapor permeability.
6、可形成4H以上的表面硬度，具有很强的耐划伤性。can form more than 4H of surface hardness, with a strong scratch resistance.
7、该产品可与基础水泥发生反应，形成整体的地坪体系，不起泡、不脱层，使地坪系统使用更持久。The product can react with the base cement to form an overall floor system, without foaming or delamination, making the floor system more durable.
8、耐侯性极佳，可用在室外。Excellent weather resistance, suitable for outdoor use.
Green environmental protection, water-based coating, strong adhesion, uniform texture, good weather resistance, higher hardness, good pollution resistance, one-way ventilation
(1)底涂：将混凝土基材处理完毕并清理干净后就可进行底涂(辊涂或刷涂)，辊涂或刷涂应均匀，厚薄一致，该底涂具有一定的透水气功能，能增强基材强度并增加涂层对基材的附着力。base coating: after the concrete substrate is processed and cleaned, the base coating (roller coating or brush coating) can be carried out. The roller coating or brush coating should be uniform in thickness, and the base coating has a certain amount of permeable aerodynamic energy, which can enhance the strength of the substrate and increase the adhesion of the coating to the substrate.
(2)中涂：在已配好的水性环氧涂料BA-30W 中加入石英砂和石英粉配成水性环氧砂浆，用刮刀将其均匀涂布，用于增加厚度及涂层抗压强度;medium coating: add quartz sand and quartz powder to the prepared water-borne epoxy coating ba-30w to form water-borne epoxy mortar, which is uniformly coated with a scraper to increase the thickness and compressive strength of the coating;
(3)腻子：中涂后用水性环氧涂料BA-30W 与石英粉配成的腻子依实际需要施工，要求达到平整无孔洞，无批刀印为准; putty: after medium application, putty made of water-based epoxy coating ba-30w and quartz powder shall be constructed according to actual needs, and it shall be required to level off without holes or batch knife printing;
(4)面涂：用辊筒将水性环氧地坪涂料BA-130W 面涂辊二道，完工后要求整体地面光泽柔和、洁净、颜色均一、无空鼓;surface coating: two rolls of water-based epoxy floor coating ba-130w surface are applied with a roller. After completion, the whole ground shall have soft luster, clean, uniform color and no empty drum;
(5)养护：面层实干需要24小时，在这期间应进行封闭，以免影响表面洁净光滑的效果。完工保养7天后方可正式投入使用(以25℃为准，低温时开放时间需适度延长)。maintenance: the surface layer needs to be dried for 24 hours, during which time it should be closed to avoid affecting the effect of clean and smooth surface. Completion of maintenance after 7 days before put into use, will be subject to 25 ℃, low temperature should be moderately open).